How To Draw A Baby Arctic Fox

Download Article

Foxes are distinctive, easily-recognizable animals that make a good subject for cartoon. Whether you'd like to draw a fox in a drawing mode or a more realistic fashion, commencement by sketching a pencil outline fabricated of diverse circles and ovals. Then, fill in the finer details and enhance your initial outline with a pen or marker. Stop off your fox drawing past adding a splash of color, then effort your hand at some more beautiful animals!

1
Sketch in the head every bit a big egg-like shape centered on the folio. Tilt the egg on its side—for instance, then the narrower part of the egg's oval is pointed to the left. Since this is a cartoon fox, feel complimentary to make the head big!^[1]
- Sketch lightly with a pencil and so that you can erase any mistakes or extra lines at the end.
2

Draw the ears with 2 smaller egg-like shapes on top of the head. Imagine the head as a clock face and place the ears at near the 12 and 3 o'clock positions. Make the far-side ear "egg" point straight upwards, and the near-side ear lean towards the fox'south (soon to be drawn) tail at about a xxx-degree angle.^[2]

Advertisement
3
Make an oval for the body that'due south well-nigh the same size equally the head. Center this oval beneath the almost-side ear and overlap it slightly over the lower section of the caput.^[3]
- Since this is a cartoon play tricks, you lot tin can adjust the proportions to your liking. If you want the head to be larger than the body, become for it!
4
Sketch in iii pairs of ovals for 2 front legs and a rear leg. For the legs, infinite out 3 upright ovals fairly evenly across the lesser of the body oval. Roughly the acme one-half of each leg oval should overlap the body oval. Add 3 smaller horizontal ovals at the bottoms of the legs to represent the feet. These should overlap the lower legs past about half.^[iv]
- There are simply 3 legs visible due to the viewing angle for this cartoon trick In other words, the far-side rear leg is subconscious backside the nigh-side rear leg.
five
Add together a cloud-, thought bubble-, or bean-shaped tail. Information technology's a bit difficult to describe the shape the tail should have—peradventure it's a question mark-shaped balloon filled with as well much air! Anyway, extend this curvy tail off the rear-stop side of the body oval, overlapping it simply slightly.^[5]
- Make the tail nearly the same size every bit the caput and at about the aforementioned level.
six
Define the features of the trick within your rough outline. For case, give the tail more of an upward curl within the outline you just made. Likewise, define the insides of the ears and the toes on the paws. Add a curved "dent" to the top front of the caput oval to help define the cage, then sketch in a grin mouth and a rounded nose and eyes.^[6]
- Since this is a drawing play a trick on, there'south lots of room for individuality hither. Yous can brand your play tricks wait a bit more than homo, a lilliputian more realistic, or whatever other way you like!
7

Darken the finishing lines and erase your original sketching lines. Go over the features you lot just created with a pen or marking to brand them permanent. After that, use an eraser to go rid of any excess pencil lines from your original sketching.^[7]
viii

Color your drawing fox to stop information technology off. "Burnt orangish" is a adept color choice for a fox, but you might want to give a cartoon play a trick on more than of a reddish colour. Add in some off-white areas on the breast, muzzle, lower legs, paws, and tail.^[viii]

Advertisement

1
Sketch a circle in the middle of the page for the fox's caput. Rather than trying to depict a perfect circle, make it a bit flattened on the lower correct side—if that's the side where you want the fox's neck and body to adhere to its head. Sketch the circle lightly with a pencil.^[9]
- Do all of the preliminary sketching in pencil and use a light bear upon. This way, you lot tin easily erase any unnecessary pencil lines as you mankind out the details of the drawing.
2
Add together 3 egg-shaped ovals to the head for the ears and muzzle. If you imagine the caput every bit a clock face, place the ears at roughly 10 and one o'clock. Make the muzzle a fleck larger than the ears and place it at about vii o'clock.^[10]
- The narrower "tops" of the egg shapes should beetle beyond the circular outline of the head. About two-thirds of the left ear, i-third of the right ear, and one-half of the muzzle should extend beyond the head.
iii

Overlap the bottom right of the head with a slightly larger circle for the neck. Make this circumvolve about i-third larger than the caput, and give it a bit of an oval shape. About one-third of it should overlap the lower right side of the circle for the head.^[eleven]
4
Sketch out a much larger oval to represent the flim-flam's body. This oval should extend to the right of and slightly below the circumvolve for the cervix. It should too overlap the neck circle and just touch the circle that represents the head.^[12]
- The torso oval should be nearly one.5 times taller than the neck circumvolve and about 3 times wider.
5
Connect a set up of elongated ovals to represent the front legs and feet. Elongate the shoulder oval vertically, brand it overlap the neck oval slightly and run to just below the body oval, and tilt it almost 30 degrees towards the front of the play tricks. Make the leg oval about twice as long and half as wide, and extend it straight downwardly from the shoulder. Create the pes oval at a right angle to the leg.^[thirteen]
- Subsequently finishing the outline for the nigh-side front leg, sketch in the front portion of the leg and foot ovals of the far-side front leg. Make them extend but a bit in front of the about-side leg.
6
Follow a like process with four ovals for the rear legs and feet. Make the rear shoulder about 1.v times as long and twice every bit wide every bit the forepart shoulder. Instead of a unmarried leg oval, draw ii ovals that meet at 30-degree angles to stand for the knee joint. Brand the back foot oval the same size equally the front end foot.^[14]
- A fox'southward back knees bend towards its tail, non towards its caput.
- As with the far-side front leg, create overlapping elements of the far-side rear leg in like proportion to the nigh-side rear leg.
7
Draw the tail out of a long, nearly banana-shaped oval. Connect it to the dorsum of the trunk oval and run it down to the footing level where the fob'due south feet are. Make the oval wide enough to partially overlap the near-side rear shoulder and knee.^[xv]
- Sketch the tail at roughly the aforementioned angle as the upper rear leg.
- Make the tail nearly the same length as the body oval, only more narrow past near half.
8
Refine the play a trick on'southward torso shape and add facial features. After you lot've finished outlining the flim-flam using various oval shapes, add definition to its various features. Brand the trunk bacteria in the belly, and profile the legs to give a more than muscular expect. Make the tail a bit wavy, and utilize minor curved lines to add indications of fur on the tail and at the front of the chest.^[16]
- Foxes have narrow, somewhat football-shaped eyes, lean muzzles with slightly-rounded noses, and angular merely slightly-rounded ears. Refining the facial features may be the toughest part, so refer to images of foxes for guidance.
nine
Darken your refinements with pen and erase the pencil outlines. In other words, trace over the more divers body, legs, tail, head, and face that yous just created. Then, erase the original ovals you used to shape the outline of the fox.^[17]
- If you lot sketched lightly in pencil, the lines should vanish without any problem.
10

Color the drawing, if desired, to finish it off. Make the lower halves of the legs, the lower third of the tail, the forepart of the chest, and the bottom half of the muzzle an fair color. Fox fur can carry shades of red, orange, and chocolate-brown, but a "burnt orange" shade may give y'all a fairly typical fob color.^[18]

Advertisement

1
Start with a circle and a curved line extending from its bottom left. Information technology should look like a balloon on a string that'southward caught in a calorie-free cakewalk, or perchance a lollipop with an arched stick. The circle represents the fox's caput, and the bend traces the path of its spine.^[19]
- Make the curved line almost three times equally long as the diameter of the circle.
2
Sketch in the pointed ears and rounded snout on the round head. Create a "T" shape that covers the bottom half of the circumvolve. Double the length of the T'south vertical stem by extending it below the circumvolve, then sketch in a "U" shape for the cage that surrounds the lower half of the T'due south stem.^[20]
- Draw 2 tall, pointed arcs—roughly the shape of wishbones—for the ears. Imagine the circle equally a clock face and place them at about the 10 and 2 o'clock positions.
3
Add another circle and curved line to outline the fox's body and rear thigh. In basic terms, draw a opposite paradigm of the circumvolve and bend that you started with so that the 2 curved lines connect the 2 circles. The lines should curve a scrap like a pair of parentheses— ( ) —while the lower circle should take a bit more of an oval shape.^[21]
- Don't center the rear thigh straight below the head. Rather, off-set information technology so information technology's roughly centered under the left ear.
4
Use more than ovals and lines to outline the tail and legs. For the tail, brand an irregular oval that narrows towards the fox'due south front side and appears a fleck squashed flat on top. Make information technology overlap and extend beyond the bottom one-half of the oval representing the fox's thigh.^[22]
- For the near-side front end shoulder, depict a circumvolve that'due south slightly smaller than the head and place it right between the 2 curves that outline the body. Extend a line downwards from the circumvolve at about a 30 degree forrard angle, and then draw a parallel line that extends from the curved line that represents the abdomen.
- The two parallel lines establish the positioning of the trick's front legs.
5

Thicken the legs and add together triangles for the front paws. Sketch in a pair of parallel lines on either side of each of the lines yous merely drew for the legs. Each leg should be nearly two-thirds every bit thick equally the diameter of the upper shoulder circumvolve. Sketch in a triangle at the bottom of each leg to outline the front feet.^[23]
6
Sketch in the face up and create a jagged outline to represent fur. Go effectually the smooth outline of your fox and add in jagged lines where fur would likely exist tufted—for instance, along the breast and spine, inside the ears, around the tail, on top of the thigh, on the underside of the shoulder, and on the paws. Then, use the T shape on the face to guide your placement of the eyes, olfactory organ, and mouth.^[24]
- Draw in two football-shaped optics that are attached to the underside of the horizontal line of the T shape. Center the round nose inside the U-shaped muzzle. Make the oral cavity a simple horizontal line across the bottom quarter of the muzzle.
7

Darken your detailed lines with pen and erase your penciled-in sketch lines. Get dorsum over the jagged lines you fabricated for the fur, and darken and add together further detail to the facial features, the paws, and whatever other areas that need further refinement. One time you're done penning in the features, erase all unnecessary pencil lines.^[25]
8
Add some colour to your fox cartoon if you wish. Foxes are often a "burnt orange" colour, but they can likewise be more red, orange, or chocolate-brown. Choose the fur color that you prefer.^[26]
- Foxes have off-white areas of fur as well, such equally the insides of the ears, the bottom one-half of the muzzle, the underside of the neck and front of the chest, the rear tertiary of the tail, and (sometimes) the paws and the bottom halves of the legs.
Advertizement

Add New Question

Question

How tin can I memorize cartoon foxes?

Practice, exercise, practice. The more you draw these foxes, the better you can call up how to draw them. Try focusing on specific features of the fox that define it, like the eyes or the pose.
Question

How do I improve my drawing skills?

Practice. Learn from other artists and challenge yourself to depict each day.
Question

What do I do if I only have a pen?

Pens are one of the best art tools! Draw using low-cal strokes at first, and then use more pressure once you have an outline.
Question

Can I use a Sharpie to draw a fox?

You tin can, but if you practice guidelines (base shapes such as circles for the base of the caput that are erased in the end), be sure to apply a pencil for initial sketching.
Question

How tin I describe an anime fox?

You can use more detailed lines with more pointy lines for fur. Information technology might also help to employ more time-consuming designs.
Question

Are there any other ways to draw a fox other than the 1 in the article?

Of course! Every artist has a dissimilar method. Some people use circles and ovals, while others can use rectangles, squares, or other shapes, such as triangles. This is why practise makes perfect; if you lot don't practice, you don't figure out what method works best for you. You lot may even come upward with a brand new method.
Question

What should I do if I make a mistake on my drawing in Sharpie?

You can try putting something like whiteout over information technology, but if that's not possible, and so there isn't really anything you can do.
Question

How do I do the fur?

Angelart

Customs Reply

Crate ragged lines beyond the outline of the fox to make fur.
Question

Does information technology make a difference if you use a mechanical pencil instead of a regular 1?

Generally, you lot go a softer looking line with a regular pencil because the lead is thicker than that of a mechanical pencil. That's about it.
Question

How tin I erase it if I only accept a pen?

Yous can't erase it, so just sketch lightly or use an erasable pen.

Run into more answers

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertizement

VideoRead Video Transcript

Thank you for submitting a tip for review!

Things Yous'll Need

Paper
Pencil
Eraser
Pen or mark
Colored pencils, crayons, markers, pastels, or pigment.

Near This Article

Article Summary 10

If yous want to draw a fox, kickoff past sketching a circle that is squashed on one end for the head. Next, draw iii triangle-like ovals on top of the head, two for ears and 1 for the fox's muzzle. For the neck and body, draw a circumvolve under the head and a longer oval under the circumvolve. To draw the legs, sketch ovals on the bottom left for the front legs and bottom right for the hind legs. Then, draw a long oval at the right-paw end for the tail. Finally, remove all unwanted lines, strengthen the contours with a pencil, and color your drawing. To learn how to describe a drawing fox or a flim-flam sitting down, read on!

Did this summary assist y'all?

Thanks to all authors for creating a page that has been read 557,615 times.